Quick Connectors replace threaded or clamped fittings and offer an easy and economical assembly. They require only a simple push together assembly, while providing a durable, high performance coupling for fluid system connections.
- Seals tight
- Easy to install
- No Tools Required
- High Quality Construction
Specializing in unique-shaped, precision fluid carrying fasteners for original equipment vehicle applications:
- Banjo Bolts
- Tube Nuts
- Braze Fittings
- Hose Connectors
RedE can provide all your rubber hose needs in a vast variety of materials for your particular application.
- Natural Rubber – NBR
- Polyisoprene – IR
- Styrene Butadiene – SBR
- Polybutadiene – BR
- Butyl – IIR
- Chlorobutyl, – CIIR Bromobutyl– BIIRNitrile – NBR
- Hypalon – CSM
- Polyacrylate – ACM
- Epichlorohydrin – ECO
- Silicone – VMQ
- Chlorinated Polyethylene – CPE
- Vamac – EAM
- Fluoroelastomers – FKM
- Neoprene – CR
Silicone Hose Products
Silicone rubber has historically been used in specialty applications in order to meet requirements other elastomers cannot. Silicones have the largest application temperature span of all rubbers (-120 F to +500 F)
- Charge Air Cooler (CAC)
- Coolant Hose
- Heater Hose
- Hump Hose
- Flex Hose
- Knit Formed Hose
- Turbocharger Hose
- Vacuum Hose
- Organic Rubber Parts
Molded Components for Tube and Hose
- Clip on / Press fit / Screw in
- Nuts in Stainless Steel or Plastic
Fasteners for Pipe/Tube and Cables
- Assembled by fitting into a hole, edged clipped or bonded
Plastic Fasteners – Push / Clip / Screw
- Sheet Metal / Plastic / Glass Applications
Molding & Trim Fasteners
- Plug buttons
- Linkage Assemblies
BRAND NEW SENSOR LINE!!
Areas of Application and Advantages
BEDIA CLS 10 stands for special versions of our well-proven CLS 40 series for heavy duty applications.
Currently, the BEDIA CLS 10 series includes a variety of sensors, which are compatible replacement parts for level switches from Cooper Standard and Robert Shaw which are obsolete nowadays – and this in well proven BEDIA quality.
This also includes sensors with 2 complementary CMOS outputs. It should be emphasized that the water sensors with two complementary outputs can be operated with a supply voltage of 4.75 V DC – 32 V DC. Thus, the same sensor can be operated at a supply voltage of nominal voltage 5 V DC and a supply voltage of 7 … 32 V DC.
BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors react when a filling level is exceeded or falls below a limit.
Aqueous mediums like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored.
Due to their rugged design, high IP protection classes and a working temperature range from -40 °C to +125 °C (-40 °F to +257 °F) the BEDIA monitoring sensors are primarily used in the following areas:
This SPECIAL or extra performance thermostat is designed for the customer that requires additional coolant flow through the cooling system. It is considered a balanced sleeve designed thermostat.
Because of its unique three port construction, the balanced sleeve thermostat equalizes the system pressures above and below the thermostat’s moving valve. Therefore the thermostat is pressure balanced and will respond to system temperatures only. It provides the customer a thermostat with a fast temperature response time and increased coolant flow to the radiator.
Customers who will benefit from increased coolant flow, such as those with:
- Heavy duty vehicles
- Trailer towing vehicles
- High performance vehicles
High horsepower vehicles
RedE parts assembly simplify purchasing activities, reduce inventory, reduce labor and free up valuable floor space in your operation. In our QS9001 certified facility we can manage all aspects of your assembly project.
- Component Sourcing
- Inventory Warehousing
- Quality Management